Vehicles
Sections
171 not categorized PORSCHE 987 CONTROL ARMSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 924 1976-79 (includes uncategorized and accessory items)
$81.13
Make a selection 99334101802ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install original control arm bushings. . Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can be made for its return to you. We do not offer a core exchange on this part. Sold individually....(choose a part on the right to read more)
$418.00
Make a selection 91134190200ATK By ordering this part number you get after previous sending in, your wishbone overhauled with new silent blocs. Order separately if required 901 341 049 04 or 911 341 049 05 to. Should it not be repairable, we will inform you immediately.
$276.10
Make a selection FVD33150020 This kit is complete and includes the front and rear monoball cartridges with press tools. Our weather sealed monoball cartridges are crafted in high carbon steel and 7075 t6 aircraft aluminum. They will positively locate the suspension arms so suspension motion is accurately repeated in every corner. Sold as a set of 4. 1 kit is necessary per car. Please note: noise may resonate inside the cabin during street use.
$715.00
Make a selection FVD33150003 Rear toe control arms - order in pairs only restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm can't compensate enough when lowering your Porsche, leaving you stuck with as much as ½ of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed. The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm. A precision teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration.
$218.90
Make a selection FVD33150005 Restore proper suspension geometry with this adjustable lower rear control arm. The factory control arm cannot compensate enough when lowering your Porsche, leaving you with as much as ½ inch of toe in. The result is poor handling and rapid tire wear. This kit will provide the additional adjustment needed. The adjusting link has a left and right hand thread on each end. Rotating the link will increase or decrease the overall length of the arm. A precision teflon lined spherical rod end replaces the compliant rubber factory bushing for improved suspension response and feedback, and also reduces toe changes during acceleration and deceleration. Sold in pairs. 1 necessary per car.
$764.50
Make a selection FVD33150045 Original rubber replacement bushing (65 shore hardness value) for the rear control arms (camber link and caster link). This bushing cartridge is weather sealed and is crafted in high carbon steel and 7075 t6 aircraft aluminum. Sold individually.
$64.90
Make a selection FVD34101702ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$418.00
Make a selection FVD34101707ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$418.00
Make a selection FVD34101807ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$418.00
Make a selection BBI9965010002 • provides additional rear toe adjustment
$875.00
Make a selection FVD34102702ATK By ordering this part number you get after previous sending in your wishbone overhauled with new race-silent blocs back. The race-silent blocs (85 shore) give you more stable driving. Should it not be repairable, we will inform you immediately.
$279.40
Make a selection FVD34101802RAT We will send you a reconditioned control arm, kindly send back your old part, or core . The reconditioned control arm has been full inspected, disassembled, degreased and we have properly installed FVD race front control arm bushings. They are made with uniball bearings so suspension motion is accurately repeated in every corner please note: each control arm is remanufactured in Germany, so the lead times can vary. This part is sold on an exchange basis, as such an additional charge (a core deposit) will be added to the purchase price of the part. After receiving your new part, kindly send back your old part, or core . Once the core is returned to us and it has been inspected to ensure it is rebuild-able and re...(choose a part on the right to read more)
$440.00
Make a selection FVD34105385 Querlenker FVD641330360 mit 85 shore sportbuchsen und lager. Sport lager mit 85 shore sind 40% harter gegenuber den originalen oem-lagern (65 shore). - perfekt fur sportlich-strasse und clubsport
$313.50
Make a selection FVD34391192SET Replace worn-out original front lower control arm bushings with our FVD sport bushings, made of rubber with an 85 shore hardness value that is the same as the rs models. 85 shore is more durable, provides more positive suspension location and is still quiet and comfortable for street use. Features: better handling reduces that sloppy steering feel makes precision adjustments of the suspension easier does not produce any noise like the teflon bushings. Rubber has a shore hardness value of 85 (like rs models) fit's like oem, simple installation made in Germany set is sold per axle. 2 necessary per car.
$158.40
Make a selection
$46.20
Make a selection 94433102100 Known as: rear axle link View/Change Diagram
$1,078.06
Make a selection 171407365G Brand new balljoint. Easily installed after drilling out the original factory rivets and replacing them with our special 7mm bolts washers and nuts (ordered separately). If the strut moves against the control arm the balljoint is bad. Will not fit the 85.2 and up 944s and 968 models as that balljoint is built into the control arm. View/Change Diagram
From $12.11
Make a selection BRAID167RSR New to the usa from spain, braid wheels offer a full range of competition wheels for tarmac rally, gravel rally, snow, track, rally cross, hill climbing, rally-raid, kart and classic cars. Monoblock wheels are specifically designed for competition, are cast from lightweight aluminum and heat treated for maximum strength. Complete with steel bolt inserts to prevent wear and hub-centric to your specific model so no hub rings are required. We are pleased and excited to make these excellent wheels available for the first time in the usa. General Fitment912 1965-69924 1976-79 924 1980-85 924 1986-88 944 1982-85 944 1985-88 944 1989-91 911 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$925.00
Make a selection DASHDPLVL One of your most valuable investments is your Porsche. Dash designs custom dash covers protect your dashboard from harmful uv rays that can cause discoloration or cracking while also reducing harmful glare and reflected heat. State-of-the-art cad cam cutting technology is used for precision patterns, giving our dash covers the best fit, best quality, and best value. Dash designs dashboard covers continue to set the benchmark for the automotive aftermarket industry. Dash designs uses the latest in bar-code tracking technology along with 2 quality control checks to ensure that each dashboard cover is custom tailored to the exact specifications of your vehicle. General Fitment911 GT3 2003-05911 TURBO/GT2 2001-05 911 1998-05 911 1994-98 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 968 1992-95 BOXSTER 1997-04 944 1985-88 944 1989-91 944 1982-85 928 1992-95 928 1987-91 928 1983-86 928 1978-82 356 1950-59 356 1960-65 912 1965-69 914 1970-76 924 1976-79 924 1980-85 924 1986-88
$52.95
Make a selection DASHDDSTX One of your most valuable investments is your Porsche. Dash designs custom dash covers protect your dashboard from harmful uv rays that can cause discoloration or cracking while also reducing harmful glare and reflected heat. State-of-the-art cad cam cutting technology is used for precision patterns, giving our dash covers the best fit, best quality, and best value. Dash designs dashboard covers continue to set the benchmark for the automotive aftermarket industry. Dash designs uses the latest in bar-code tracking technology along with 2 quality control checks to ensure that each dashboard cover is custom tailored to the exact specifications of your vehicle. General Fitment911 GT3 2003-05911 TURBO/GT2 2001-05 911 1998-05 911 1994-98 911 1989-94 911 1987-89 911 1984-86 911 1978-83 930 1975-77 911 1974-77 911 1970-73 968 1992-95 BOXSTER 1997-04 944 1985-88 944 1989-91 944 1982-85 928 1992-95 928 1987-91 928 1983-86 928 1978-82 356 1950-59 356 1960-65 912 1965-69 914 1970-76 924 1976-79 924 1980-85 924 1986-88
$58.95
Make a selection BBI9865010001 Features
$845.00
Make a selection BBI9964010006 Finally, a solution that allows you to safely increase without the risk of damaging your front axles. as you add GT3 shims to your front Porsche 996/997 turbo lower control arms, you move the cv joints beyond their safe range of motion, risking failure and expensive damage. These 10mm thick precision spacers, used with 16mm of lca shims will provide an additional -1.7 deg. Of camber, while maintaining the factory cv joint and axle relationship. the spacer design features a concentric lip that positively and accurately locates it to the cv joint for perfect balance and no vibration. Each kit includes two spacers and all the needed hardware in high class 10.9 grad
$375.00
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |